Water Pumps
Showing all 14 results
-
All Power Tools, Water Pumps
CENTRIC WATER PUMP
Model EPC N100T/1N EPC N110T/1N EPC N115/1N Power(HP/KW) 0.5/0.37 0.75/0.56 1.0/0.75 Voltage (V) 230 230 230 Current (A) 2.9 3.8 5.2 Frequency (Hz) 50 50 50 Phase 1 1 1 Size (Inches) 1*1 1*1 1*1 Max. Head (FT) 65 80 100 Capacity (IGPH) 800 800 800 AT Head (FT) 30 55 80 Rated Operating Pressure (BAR) 0.4-1.6 0.6-2.0 0.8-2.8 New Weight (Kg) 9 12.6 14.3 SKU: 10CJ024S -
All Power Tools, Water Pumps
PEDROLLO WATER PUMP
Pedrollo PQM-70 boiler fill water pump. 1″ Inlet and Outlet
Flow rate up to 90 L/min (5.4 m³/hr)
Dynamic head up to 180mPUMP INSTALLATION AND APPLICATIONS
These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components.
RELIABLE, ECONOMICAL AND SIMPLE TO USE, THEY ARE SUITABLE FOR DOMESTIC OR INDUSTRIAL APPLICATIONS, THE AUTOMATIC DISTRIBUTION OF WATER FROM SURGE TANKS, WATERING GARDENS AND FOR BOOSTING INSUFFICIENT MAINS WATER PRESSURE*.
These pumps should be installed in a covered area, protected against the weather.
PERFORMANCE
The various models in the PQ series are designed to suit a wide range of applications, with features including:
- high heads achieved from low motor powers.
- small variations in delivery rates in the event of changes in the pressure demand;
- high tolerance to entrained air in the pumped liquid
STRUCTURAL CHARACTERISTICS
- Cast iron PUMP BODY, with UNI ISO 228/1 gas threaded suction and delivery ports
- (Optional BRONZEbody available on 60 size models)
- Aluminum MOTOR BRACKETwith brass insert (patented), reducing difficulties when starting the pump after long periods without use.
- BRASS IMPELLER, with radial peripheral blades, floating on the shaft
- AISI 316 stainless steel MOTOR SHAFT(AISI 416 up to 0.75 kW)
- MOTOR: pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor, which is quiet running, closed and externally ventilated, with <IM B3> structural shape, suitable for continuous duty.
- INSULATIONclass F (B up to 0.75 kW).
A thermal cutout device (motor protector) is incorporated in single phase motors.
Three phase motors require an adequate external motor protector complying with current standards - PROTECTIONIP 44.
- CONSTRUCTION AND SAFETY STANDARDS: complies with EN 60 335 -1, CEI 61-150), EN60034-1), (IEC 34-1, CEI 2-3)
- REGISTERED MODEL
SKU: n/a -
All Power Tools, Water Pumps
PEDROLLO WATER PUMP
Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The self-priming JSW pumps are designed to pump water even in cases where air is present. As a result of their reliability and the fact that they are easy to use, they are recommended for use in domestic applications such as the distribution of water in combination with small or medium sized pressure sets, and for the irrigation of gardens and allotments, etc.
- Liquid type: clean water
- Uses: domestic, civil
- Applications: water supply systems, fire-fighting sets, washing systems, pressure systems, irrigation pumps, liquids transfer
- Typology: surface
- Family: self-priming
- Performance Range: Flow rate up to 85 l/min (5,1 m³/h), Head up to 70 m
Application Limit:
- Temperature of the liquid to +40 deg C
- Ambient Temperature da -10 deg C to +40 deg C
- Manometric suction lift up to 9 m (HS)
- working pressure 6.5 bar
SKU: JSWm 2A -
All Power Tools, Water Pumps
PEDROLLO WATER PUMP
It is recommended for pumping clean water and liquids chemically non aggressive to the materials making up the pump.The self-priming pump JSW is designed to suck up water even in the presence of air mixed with the pumped liquid.For the reliability and simplicity of use is recommended for home use, especially for the distribution of water coupled to small and / or medium tanks, autoclaves, for irrigation of orchards and gardens, etc. The installation is to be carried out indoors or otherwise protected from the weather.
SKU: JSWM 2AH-1.5H -
All Power Tools, Water Pumps
PEDROLLO WATER PUMP
Pedrollo PQM-70 boiler fill water pump. 1″ Inlet and Outlet
Flow rate up to 90 L/min (5.4 m³/hr)
Dynamic head up to 180mPUMP INSTALLATION AND APPLICATIONS
These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components.
RELIABLE, ECONOMICAL AND SIMPLE TO USE, THEY ARE SUITABLE FOR DOMESTIC OR INDUSTRIAL APPLICATIONS, THE AUTOMATIC DISTRIBUTION OF WATER FROM SURGE TANKS, WATERING GARDENS AND FOR BOOSTING INSUFFICIENT MAINS WATER PRESSURE*.
These pumps should be installed in a covered area, protected against the weather.
PERFORMANCE
The various models in the PQ series are designed to suit a wide range of applications, with features including:
- high heads achieved from low motor powers.
- small variations in delivery rates in the event of changes in the pressure demand;
- high tolerance to entrained air in the pumped liquid
STRUCTURAL CHARACTERISTICS
- Cast iron PUMP BODY, with UNI ISO 228/1 gas threaded suction and delivery ports
- (Optional BRONZEbody available on 60 size models)
- Aluminum MOTOR BRACKETwith brass insert (patented), reducing difficulties when starting the pump after long periods without use.
- BRASS IMPELLER, with radial peripheral blades, floating on the shaft
- AISI 316 stainless steel MOTOR SHAFT(AISI 416 up to 0.75 kW)
- MOTOR: pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor, which is quiet running, closed and externally ventilated, with <IM B3> structural shape, suitable for continuous duty.
- INSULATIONclass F (B up to 0.75 kW).
A thermal cutout device (motor protector) is incorporated in single phase motors.
Three phase motors require an adequate external motor protector complying with current standards - PROTECTIONIP 44.
- CONSTRUCTION AND SAFETY STANDARDS: complies with EN 60 335 -1, CEI 61-150), EN60034-1), (IEC 34-1, CEI 2-3)
- REGISTERED MODEL
SKU: PQM70 -
All Power Tools, Tools & Accessories, Water Pumps
Submersible pump
Voltage:220 -240V~50Hz Rated power: 750W(1.0HP) Max.head:32m Max.flow:120L/mim
Pipe diameter:1″
9m length cable Copper wire motor Stainless steel base Stainless steel screws Stainless steel shaft Thermal protection With float switch
For clean waterSKU: n/a